Category: Cost guides

What our jobs cost, in plain figures, from Mendwell.

  • Why do handyman quotes differ so much?

    You ask three trades to price the same job and get three numbers that do not look like they describe the same work. That is the most common thing people tell us, so here is what is behind it, how we set our prices, and the honest reasons ours go up or down.

    Why can two quotes for the same job be hundreds of pounds apart?

    Because they are rarely for the same job. One quote includes the materials, one does not. One assumes a solid door, one a hollow one. One has the room sheeted up and the rubbish taken away, the other leaves both to you. A quote that says “fit door, £120” and a quote that says “supply and fit solid core door, new hinges, latch and handles, adjust, sand edges ready for paint, £215” can be for the same opening, but they are not the same job.

    The second reason is how the trade works out the number. Some price by the hour and guess the hours. Some price by the job and know what it takes because they have done it many times. The second kind is usually higher on paper and cheaper by the time the job is finished, because nothing gets added on the day.

    How does Mendwell set a price?

    We visit, then we price the job, not the hours. Every job type we do has a written method behind it: what is involved, what materials it takes, what protects your home while it happens, and what it should cost at the standard of a reputable, insured local trade. The figure on your quote is that method applied to your house. It is fixed in writing before we start, and it does not move unless we find something on the day that could not have been seen at the visit. If that happens we stop, tell you, and agree it before carrying on.

    We deliberately do not price to be the cheapest. We price to do the job once, properly, and to still be here when you need something else doing.

    Why do you visit before quoting instead of pricing from a photo?

    Because the photo does not show the things that decide the price. It shows the style of a door, not whether the frame is square. It shows a fence, not whether the posts are soft at the ground line. A visit takes about half an hour, and it is the difference between a fixed price and an estimate that grows.

    What is the service rate, and why do you steer people away from it?

    The service rate is £80, and it exists for the small, mixed jobs that cannot be priced ahead: a list of odd things around the house, a fault we need to open up to understand. We are honest that it is not the cheap option. It also means turning up without a plan, without the right materials in the van, and guessing how long things take. A priced, planned job is nearly always better value, which is why we will always try to give you a fixed price first.

    What makes a job cost more than the headline figure?

    • Materials that are better than the cheapest option. We fit solid core doors, not hollow ones. Three hinges, not two. That is part of the price and part of why it lasts.
    • Access. First-floor windows, a loft hatch, a narrow side passage, no parking nearby. Anything that adds carrying, ladders or time.
    • What is found when the old thing comes out. A rotten frame behind a door, a broken post behind a panel. This is the variation we tell you about before doing anything.
    • Protecting your home. Sheeting the floor and the furniture, taping off, cleaning up. It is in every price and it is not free.
    • Waste removal. Taking the old door, the old fence, the rubble away is never included by default. It is a priced line on the quote if you want it, so you can compare like with like.
    • Managed trades. Where a job needs an electrician or a plumber, we bring one in and manage it. You get one quote and one point of contact, and that management is in the figure.

    What makes a job cost less?

    • Bundling. Several small jobs on one visit are cheaper than three separate visits, because the set-up and the travel are paid once.
    • Clear access. The area cleared, the car moved, the key arranged if you are out.
    • Doing the finishing yourself. Our doors come primed. Plenty of people paint them.
    • Booking ahead. Weather-driven work booked six to eight weeks early is easier and cheaper than the same work in a January storm.

    Why do your prices change over time?

    Three reasons, and we will always say which one it is.

    Materials move. Timber, hardware and paint prices change through the year. When a supplier price moves enough to change what a job costs, our published figures move with it, and the date at the bottom of every cost guide tells you when the figure was last checked.

    We learn the job better. Every job we do teaches us something about how long it really takes and what goes wrong. When that changes the method, the price changes to match, sometimes down.

    The standard goes up. When we add something to every job of a type, say sheeting the windows on a flooring day because we should have done it last time, the price carries it.

    What does not change a price is who is asking. Every customer gets the same method and the same figure for the same work.

    Do you take a deposit, and when do I pay?

    Where a job needs materials worth more than about £60, we ask for a deposit of 40% before we order them, so the materials are bought for your job and not a guess. The balance is paid on completion, by bank transfer, against an invoice. The price on the quote is the total you pay. Nothing is added on top.

    Why is the cheapest quote often the most expensive?

    Because the number you are shown is not the number you end up paying. A cheap quote is usually cheap because something is missing: the materials, the protection, the second coat, the third hinge, the rubbish, or the return visit when the door drops. You pay for those later, either to the same trade as extras or to a second trade to put it right.

    We would rather you had the honest figure at the start. If that means we are not the cheapest, that is fine, and we will say so.

    Want a proper price?

    Book a visit at mendwell.co.uk/book. About half an hour, and you get a fixed price in writing.

    Mendwell is property maintenance for homes and businesses, based in Nuneaton and working across Warwickshire for people who want a job done properly rather than quickly. If you are outside the towns you see us mention, ask anyway.

    Prices and policies on this page reviewed September 2026.

  • What does it cost to replace an internal door?

    Most trades will not put a price on their website. We think that is unhelpful, so here is what a new internal door costs with Mendwell, what drives the price up or down, and why some quotes you get will be cheaper than ours.

    The short answer

    A new solid core internal door, supplied and fitted into your existing frame, costs around £205 to £225 all in.

    That includes the door, new hinges, latch and lever handles, fitting, adjusting so it closes cleanly, and sanding every planed edge smooth so it is ready for decorating. The door comes white primed, ready for painting.

    Taking the old door away is not included. We can do it if you would like, for a small extra charge agreed on the quote.

    If you have several doors done on the same visit, each one is priced the same. There is no hidden call-out charge on top.

    What is in that price

    • The door itself. We fit a solid core door as standard, about £70 to £80 to buy.
    • New hinges, latch and lever handles, about £20 to £35. That is a chrome lever handle on a round rose, the same set we fit as standard. A different handle, or matching something already in the house, changes the price and we cost it at the visit. We use three hinges on every door, not two, because a solid door is heavy and two hinges is why doors drop and catch.
    • Fitting, £110 per door. That covers trimming the door to your opening, cutting the hinge and latch recesses, hanging it, fitting the handles and adjusting it until it shuts without rattling and stays where you leave it.
    • Protecting the room and the route in, and cleaning up after.

    What makes it cost more

    The frame needs replacing too. If the existing door frame (the lining) is loose, split or out of square, a new door will never hang well in it. A new lining supplied and fitted is around £250 on a stud wall or £300 on a brick wall, including stripping out the old one. Hanging the door into a new frame is £139 rather than £110, because the hinge recesses have to be cut in both the door and the frame.

    New architrave. A new frame usually means new architrave, the trim around the opening. That is £145 for the first face and £85 for the other side of the same opening, supplied and fitted. Filling and painting is a separate option.

    A non-standard opening. Most openings take a standard 610, 686 or 762 mm door. If yours is within about 15 mm of one of those, we trim the door to fit and that adds £40.

    If it is further off than that, trimming is not the answer, because timber can come off a door and cannot go back on. Two things change instead. The choice of door narrows, since not every style is made in every size. And the frame may need packing out, which means fixing timber inside it to bring the opening down to a standard size, set plumb so the door still closes evenly. Once it is painted you do not see it. Which of those applies comes down to the measurement and to whether the existing frame is sound, so an odd size opening is one we price after a visit rather than from a page.

    Painting. The door comes primed, not painted. Painting is not in the price above. Plenty of customers do this themselves.

    So a full job, new door, new frame and architrave both sides on a stud wall, comes to roughly £715 to £735 all in. On a brick wall, roughly £765 to £785.

    Why some quotes will be cheaper than ours

    The honest answer is usually the door.

    A hollow core door costs £30 to £50 to buy and is quicker to hang. It is two thin skins over a cardboard lattice. It dents when something catches it, the hinge screws work loose because there is nothing solid for them to bite into, and when it is damaged it is replaced rather than repaired.

    We do not fit hollow core doors, even if asked. That is a deliberate choice, not an upsell. The difference in price is small against fitting the same door twice.

    If a quote is well under £150 for a door supplied and fitted, it is almost certainly a hollow door on two hinges. That may be fine for a cupboard. It is not what we would put on a bedroom or a bathroom.

    What the national guides say

    For comparison, the Checkatrade cost guide for 2026 puts replacing an internal door at £120 to £400, with an average of around £250. We sit a little under that average, with a heavier door.

    Who this is not for

    • Fire doors. A solid core door is not a fire door. If you need a fire door, for example between a garage and the house, or on a landing in a three-storey house, that is a different product with seals and certified fittings. We quote those separately and say so.
    • Made to measure or oversized doors. These are priced individually.
    • A door only, with your own frame repairs. If the frame is not sound we will tell you before we fit anything, not after.

    Want a proper price?

    We visit before we quote. A photo tells us the style of door, but not whether the frame is square or the opening is a standard size, and those are what decide the price. The visit takes about half an hour, and you get a fixed price in writing afterwards, so there are no surprises on the day.

    Book a visit.

    Mendwell. Every Property Properly